The following Matlab project contains the source code and Matlab examples used for performance analysis of symbol chip based minimum variance beamformer configuration for syn. Current direct sequence code division multiple access (DS-CDMA) system suffer from Multiple access interference (MAI) and Inter symbol interference (ISI) due to the frequency selective channel.

The following Matlab project contains the source code and Matlab examples used for frequency hopping spread spectrum, direct sequence spread spectrum and cdma. These programmes are not heavily commented but infact are very simple and intutive to understand the Frequency hopping and related tasks.

The following Matlab project contains the source code and Matlab examples used for coaxial cable based cdma system simulation. This is a program that can simulate a CDMA encoding and decoding process.

The following Matlab project contains the source code and Matlab examples used for is 95a cdma power control. Simulink® and Stateflow® model of IS-95A CDMA reverse traffic channel power control. Includes reverse traffic channel physical layer, together with open and closed loop algorithms for base station and mobile implemented as state machines with Stateflow.

The following Matlab project contains the source code and Matlab examples used for distributive power control algorithm. This code is a simulation of 3 user Distributed Power Control algorithm used in CDMA networks for interference coordination.

The following Matlab project contains the source code and Matlab examples used for space time processing for cdma mobile communications. Written for research students and design engineers, this book addresses many basic questions related to the use of space-time processing in CDMA-based third-generation systems. For a full book description and ordering information, please refer to http://www.mathworks.com/support/books/book1654.jsp?category=2&language=-1

The following Matlab project contains the source code and Matlab examples used for cdma signal on awgn. Data pulses spreaded by PN sequence random code pass on AWGN channel and receiver de-spread this spreaded signal then find original bit of information Msg box show number of error on transmission This code write for single user but you can use multi user environment using nested looping.

The following Matlab project contains the source code and Matlab examples used for cdma signal on awgn. This code show spreading of signal and effect of channel

The following Matlab project contains the source code and Matlab examples used for basic cdma transmitter and receiver. User binary 8 bits length data Data=((randint(1,8))>.5)+0; Spreading code name Goldcode only variable mane with 15 bit length. Goldcode=((randint(1,15))>.5)+0;

The following Matlab project contains the source code and Matlab examples used for image over cdma. This is an m-file that contains a simulation of "Image Transmission over DS-CDMA system " with the assumption of an AWGN channel.

The following Matlab project contains the source code and Matlab examples used for cdma1dl. in this cdma model direct sequence spreding of message signal sinal is done by Xoring with message signal and ber is calculated at receiver

The following Matlab project contains the source code and Matlab examples used for power control in cdma. this code on not finished, but almost 80% done, the code based on the study of : --------------------------------------- "Performance Analysis of Downlink Power Control in CDMA Systems" Soumya Das, Sachin Ganu, Natalia Rivera, Ritabrata Roy email: fsoumya, sachin, nrivera, ritog@winlab.

The following Matlab project contains the source code and Matlab examples used for gold seq cdma. cdma with help of gold code

The following Matlab project contains the source code and Matlab examples used for cdma modem for 2 users . user1 and user2 are transmitting data through a noisy channel at the same time and using the same carrier frequency.

The following Matlab project contains the source code and Matlab examples used for walsh cdma. Enter the data length8 Enter the length of Number of bits must be power of 2.....16

The following Matlab project contains the source code and Matlab examples used for cdma modem. Description of program 1.

The following Matlab project contains the source code and Matlab examples used for cdma modem. Comments are included. Clear concept is given in the coding quite easy to understand.

The following Matlab project contains the source code and Matlab examples used for this is a general cdma simulation. In this zip file, there are three files; the main program (cdma_assignment) which is the simulation of any number of users and any number of bits for each user.

The following Matlab project contains the source code and Matlab examples used for loading analog signal,converting to binary,channel encoding,m-sequence generation.incomplete cdma . Loading analog signal,converting to binary,channel encoding,m-sequence generation.incomplete CDMA

The following Matlab project contains the source code and Matlab examples used for simulation of ds-cdma . This script simulate DS-CDMA for two or more users.